The following are installation and maintenance tips for thermal insulation aluminum door and window hardware accessories:

Installation tips:

1. Preparation: Before installation, ensure that the size of the thermal insulation aluminum door and window frames and sashes is accurate, the surface is flat and clean, and there is no debris and dust.

2. Accurate position: According to the installation instructions of the hardware accessories, accurately determine the installation position, use measuring tools to measure, and ensure that each accessory is installed in the correct position.

3. Screw tightening: Use suitable screws and screwdrivers to firmly fix the hardware accessories on the doors and windows. Do not tighten the screws too much to avoid damaging the profile, nor too loose to cause the accessories to loosen.

4. Debug balance: After installation, debug the switches of the doors and windows to ensure that the doors and windows are flexible and smooth, and are well sealed when closed.

Maintenance tips for thermal insulation aluminum doors and windows:

1. Regular cleaning: Use a soft dry cloth to wipe the hardware accessories to remove dust and dirt on the surface. Avoid using a wet cloth to prevent moisture from entering the accessories and causing rust.

2. Lubrication and maintenance: Regularly add lubricating oil or grease to hinges, hinges, rails and other moving parts to maintain their flexibility, but be careful not to add too much to avoid dust.

3. Check and tighten: Regularly check whether the screws are loose. If they are loose, tighten them in time to prevent the accessories from falling off or affecting the performance of doors and windows.

4. Avoid collision: In daily use, avoid hitting the door and window hardware accessories with force to avoid deformation or damage.

5. Pay attention to moisture-proof: In humid weather or environment, pay special attention to the moisture-proof of hardware accessories, and apply rust-proof agent appropriately.

For example, if you find that the switch of the insulated aluminum door and window becomes heavy or inflexible, it may be that the hardware accessories lack lubrication. Adding lubricating oil in time can solve the problem; when cleaning, delicate parts such as the lock core can be cleaned with special detergents and brushes.